flex7 have developed a unique range of plug-in switches that operate at Protected Extra Low Voltage (PELV) and offer the installer dramatic time savings. Switches are connected using a lead with RJ11 connectors, one end plugging into the switch, the other into the flex7 control pack or ZoneLite unit. This negates the need for on-site cable preparation and results in the switch being connected in seconds.
  • Simple plug-in installation with RJ11 connectivity
  • No onsite terminations
  • Available as 1, 2, 3 or 4 gang module
  • Retractive & centre return retractive options
  • Clips into 50mm x 50mm Euromod style fascia
  • Black or white to suit decor / Part M
  • Operates at Protected Extra Low Voltage (PELV)

Working in conjunction with a flex7 ZoneLite or control pack, the FWS turns the connected luminaires on / off and dims. Note, use of the correct flex7 control pack and a suitable luminaire is required for dimming applications. The following models are available:

  • 1, 2, 3, or 4 gang
  • Retractive or centre retractive
  • Black or white
  • With or without decorative fascia

The FWS must be securely fixed to a suitable surface using a 35mm deep back box with 60.3mm fixing centres.
Models supplied without a decorative fascia are designed to clip into a 50 x 50 Euromod fascia.

The FWS must be connected to the flex7 ZoneLite or the control pack via FSL#/BL lead/s . One FSL#/BL is required per ‘gang’. All variants operate at PELV.

Rating: 5v dc
IP Rating: IP2PX
Compliance: LVD 2014/35/EU, EMC 2014/30/EU

Voltimum Unboxing

Watch the Voltimum flex7 switches unboxing review

Want to find out more?

Read our article on switches from our industry expert – Paul Bellamy